Atlas Metal Industries Drop-In Serving Equipment Cold Pan WCMD-6SD

Atlas Metal Industries-ATL-WCMD-6SD-31 Zoom Scratch/Dent

Only 1 left

Availability: In stock - Usually Ships in 1-3 Business Days

$2,800.00 /Each

Retail Price: $5,500.00

Atlas Metal Industries Drop-In Serving Equipment Cold Pan WCMD-6
Item Condition: Scratch/Dent

SKU: ATL-WCMD-6SD
MPN: WCMD-6
Cullincini Id: 624333
Sign up for price alert

Attached Files:

Details

Details

This drop-in pan is brand new and has only been used as a demo in our warehouse.

The drop-in pan can be installed in virtually any counter and can be provided as fully self-contained - just plug it in and turn it on - or remote, where there's a need to locate the compressor at a different location. The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4" stainless steel drain. The cold pan accommodates standard 12" x 20" pans, perfect for any cold food serving application. Features Accommodates your deepest pan or insert - 9-3/4" deep Fully insulated for maximum efficiency and energy savings Factory applied gasket - makes installation a snap and seals units to the counter top, thus eliminating seepage Accommodates standard 12" X 20" pans with the use of separator channel(s), or fractional size pans with the use of optional adapter bars. 1-Year Parts & Labor Warranty NSF Certified; UL Recognized Specifications

TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface of the top to hold the removable separator channels in place.

LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The liner has copper tubing firmly soldered to the exterior bottom. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided.

INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 1-1/2" thick on the bottom and enclosed with a 22 gauge galvanized steel outer liner. The entire unit removable without the use of tools.

REFRIGERATION SYSTEM (WCM SERIES ONLY): The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.

NOTE: Proper ventilation must be provided in counter.

ELECTRICAL (WCM SERIES ONLY): The unit will be wired for 15 amps., 120 volt, single phase operation with an on/off thermostat switch and pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will be provided. *: Units with these accessories are not currently UL listed. Accessories 5YW - 5-Year Compressor Warranty WFB - Stainless steel perforated false bottom Stainless Steel adapter bars (pg DI-51-52) Stainless Steel adapter plates (pg DI-51-52) CP - Cover Plate with handles, S/S 2060-1 - Condensate Evaporator RS - Remote on/off switch for counter mounting RDVE - Rear Drain Valve Extension * 220 Volt - 50 Cycle Compressor

Additional Info

Additional Info

NameAtlas Metal Industries Drop-In Serving Equipment Cold Pan WCMD-6SD
ManufacturerAtlas Metal Industries
MPNWCMD-6
SKUATL-WCMD-6SD
UPC099992619451
Case Pack1
UOMEach
ColorStainless Steel
MaterialStainless Steel
Our CommentsUsed as a demo in our warehouse.
Width (in)24
Length (in)80.5
Depth (in)19.8
Item Weight (lbs)315
Shipping Weight (lbs)415.0000

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Policies

Return Policy

Each product in the Cullincini Restaurant Supply, Scratch and Dent category is tested by an experienced Technician prior to shipping and is guaranteed to work perfectly upon arrival, so please note that all items are sold as is, and all sales are final.  Consequently, we recommend that you carefully read the product description, damage/use description, and other related product literature such as Specification Sheets, product manuals, and more before placing your order.  If you have any questions or concerns about a product even after reading the description and product literature, please contact us at (916)921-1190.  Please inspect each item upon its arrival.  If you observe any damage not detailed in the description on this website that may have been caused during shipping, do not sign for the delivery and contact us ASAP.

 

Warranty Policy

Scratch & Dent products DO NOT have a warranty unless otherwise specified. If the warranty is honored, it will be clearly noted in the description of the item. If you have any questions or concerns about a product even after reading the description and product literature, please contact us.